French Cleat Tool Wall Move and Update // Woodworking Shop Organization
Hey everyone! Released my French Cleat Tool Wall follow-up video today. In this video I show you how I take down my wall for my shop move. The french cleat panels was a brilliant move as it made moving a breeze. I was able to take down my panels one by one and reuse the same Fast Cap screws. In fact I used the same amount of screws and had some left over after completing all 5 new panels. My new shop is a tad bit bigger than my old one as well as higher ceilings. The bottom of my wall has concrete which pushed the cleat panels up about 2 1/2 feet. The little extra space now feels like a ton of extra space and I plan on utilizing every inch of it. Once i had all my panels removed I transported them to my new shop, unloaded and then eventually began figuring out how I would situate the panels. I concluded that I could fit 5 panels on the wall so I purchased additional 3/4 inch pure bond plywood from Home Depot and got to work. I had 2 of the original panels up fairly quick but I did not document that. Once I picked up my plywood, I decided to keep it all in one piece instead of a top and bottom panel. I just about foot off the bottom since I didn’t want the panel going all the way to the ceiling. Once the sheet was at the height that I wanted I ripped down all my french cleats using 45 degrees at the table saw. 14 cleats per panel. The pure bond birch plywood was superb. All the pieces matched perfectly. I ordered my plywood online and was really impressed with Home Depot picking out such nice pieces. Stellar service and stellar results. So just as before, I used glue and brad nails and this has proven to be an awesome combination. I finished up the last 2 panels and I had to cut a little off the edge of the last panel to fit it in the corner but it fit like a glove. As I said I used all existing Fast Cap screws and lined up my screw holes with the studs in the wall. Once I had all the panels installed, I immediately created a few holders that I needed. In the video I demonstrate making the chisel holder. I hope you enjoy the video. Please subscribe, comment and ask any questions during your own cleat wall build. Thanks for watching!!
► T-SHIRTS! - WoodShaped logo and Sharper Things SINGLE design front print: https://www.woodshaped.com/shop-tees/#!/
► Subscribe: https://www.youtube.com/woodshaped?su...
I am a woodworker from Lexington, KY. If you want to come along for the ride and learn some woodworking with me then please subscribe!
► CONNECT WITH US!
► SUPPORT US: https://patreon.com/woodshaped
One time: www.woodshaped.com/donate
4 New Sheets 3/4 inch PureBond Baltic Birch Plywood for the wall expansion
Purchased from Home Depot. I used an entire sheet just for ripping down cleats for the new panels.
► TOOLS USED:
Senco Finish Pro 21XP 21ga Pinner-
PowRyte 300 PSI Reinforced Air Hose-
Capri Tools 2-Way Air Blow Gun-
EPAuto Industrial Type D 1/4-Inch Coupler and Plug Kit-
CADEX M-25-10M 21 Gauge Slight Headed 1" Brad Nails-
Flush Mount Drill Bit-
Makita RT0701CX3 1-1/4 HP Compact Router Kit - https://amzn.to/2jZY9vH
WoodPeckers Precision Woodworking tools 1281R Woodworking square - https://amzn.to/2jZYBKp
Dozuki Noko Giri 9-1/2" DoveTail Razor Saw - https://amzn.to/2Ktrc61
FastCap Glu-Bot Glue Bottle (16 Ounces) - https://amzn.to/2KrSxFo
Gyokucho Razorsaw Flush Cutting Double Edge Saw 125mm with https://amzn.to/2rLFGWT
KREG TOOL KHC3 Kreg Wood Project Clamp with Automaxx, 3" - https://amzn.to/2GjPJrK
Lufkin L625SCTMP 1-Inch by 25-Feet Hi-Viz Self Centering Orange Power Return Tape - https://amzn.to/2wGhsmE
Wood Is Good Mallets: